_____ is dependent not only on the temperature, but also on the amount of substance available.

A. Condensation

B. Deposition

C. Evaporation

D. Melting

For those aiming to excel in their ATI TEAS test and secure admission into their desired nursing program, ExamGates offers an invaluable resource. Our platform features practice questions meticulously crafted by tutors who have previously aced the exam themselves. With ExamGates, you can access content that is 100% relevant to the test, accompanied by vivid images and illustrations. Additionally, our platform provides comprehensive explanations for both correct and incorrect answers, empowering you to fully grasp the material and optimize your study efforts. Take the first step towards your nursing aspirations with ExamGates today.

Answer Explanation:

Unlike condensation, deposition, and melting, evaporation is dependent not only on the temperature, but also on the amount of a substance available.

Condensation is the change of a gas or vapor to a liquid. A change in the pressure and the temperature of a substance causes this change. The condensation point is the same as the boiling point of a substance. It is most noticeable when there is a large temperature difference between an object and the atmosphere. Condensation is also the opposite of evaporation.

Evaporation is the change of a liquid to a gas on the surface of a substance. This is not to be confused with boiling, which is a phase transition of an entire substance from a liquid to a gas. The evaporation point is the same as the freezing point of a substance. As the temperature increases, the rate of evaporation also increases. Evaporation depends not only on the temperature, but also on the amount of substance available.

Freezing is the change of a liquid to a solid. It occurs when the temperature drops below the freezing point. The amount of heat that has been removed from the substance allows the particles of the substance to draw closer together, and the material changes from a liquid to a solid. It is the opposite of melting.

Melting is the change of a solid into a liquid. For melting to occur, enough heat must be added to the substance. When this is done, the molecules move around more, and the particles are unable to hold together as tightly as they can in a solid. They break apart, and the solid becomes a liquid.

Sublimation is a solid changing into a gas. As a material sublimates, it does not pass through the liquid state. An example of sublimation is carbon dioxide, a gas, changing into dry ice, a solid. It is the reverse of deposition.

Deposition is a gas changing into a solid without going through the liquid phase. It is an uncommon phase change. An example is when it is extremely cold outside and the cold air comes in contact with a window. Ice will form on the window without going through the liquid state.

Therefore, the Correct Answer is C.

More Questions on TEAS 7 Science Practice Test 2

Question 1:

Blood oxygen levels are most likely low when blood _____.

A. leaves the aorta

B. fills the right atrium

C. reaches body tissues

D. flows through arteries

The Correct Answer is B.

Blood continually flows in one direction, beginning in the heart and proceeding to the arteries, arterioles, and capillaries. When blood reaches the capillaries, exchanges occur between blood and tissues. After this exchange happens, blood is collected into venules, which feed into veins and eventually flow back to the heart’s atrium. The heart must relax between two heartbeats for blood circulation to begin.

Two types of circulatory processes occur in the body:

Systemic circulation

  • The pulmonary vein pushes oxygenated blood into the left atrium.
  • As the atrium relaxes, oxygenated blood drains into the left ventricle through the mitral valve. 3. The left ventricle pumps oxygenated blood to the aorta.
  • Blood travels through the arteries and arterioles before reaching the capillaries that surround the tissues.

Pulmonary circulation

  • Two major veins, the Superior Vena Cava and the Inferior Vena Cava, brings deoxygenated blood from the upper and lower half of the body.
  • Deoxygenated blood is pooled into the right atrium and then sent into the right ventricle through the tricuspid valve, which prevents blood from flowing backward.
  • The right ventricle contracts, causing the blood to be pushed through the pulmonary valve into the pulmonary artery.
  • Deoxygenated blood becomes oxygenated in the lungs.
  • Oxygenated blood returns from the lungs to the left atrium through the pulmonary veins.


Question 2:

Which of the following is a component of a chromosome?

A. Centromere

B. Gamete

C. Homologue

D. Ribose

The Correct Answer is A.

The protein disc that holds two sister chromatids together is what collectively makes a chromosome. A gene is a segment of DNA, deoxyribonucleic acid, which transmits information from parent to offspring. A single molecule of DNA has thousands of genes. A chromosome is a rod-shaped structure that forms when a single DNA molecule and its associated proteins coil tightly before cell division.

Chromosomes have two components:

  • Chromatids: two copies of each chromosome
  • Centromeres: protein discs that attach the chromatids together

Human cells have 23 sets of different chromosomes. The two copies of each chromosome are called homologous chromosomes, or homologues. An offspring receives one homologue from each parent. When a cell contains two homologues of each chromosome, it is termed diploid (2n). A haploid (n) cell contains only one homologue of each chromosome. The only haploid cells humans have are the sperm and eggs cells known as gametes.


Question 3:

The sequence of amino acids in a gene determines

A. the primary structure of a codon

B. the primary structure of a protein

C. the primary structure of a nucleotide

D. the primary structure of a nucleic acid.

The Correct Answer is B.

The sequence of amino acids in a gene determines the primary structure of a protein. The components necessary for translation are located in the cytoplasm. Translation is the making of proteins by mRNA binding to a ribosome with the start codon that initiates the production of amino acids. A peptide bond forms and connects the amino acids together. The sequence of amino acids determines the protein’s structure, which determines its function.


Question 4:

Which is true regarding the Urinary system?

A. Kidneys makes urine, Kidney help regulate water balance.

B. As a person ages, kidney tissue and filtration capacity increase, Regulates levels of electrolytes such as sodium and potassium.

C. Eliminates metabolic wastes., Kidneys makes urine., Kidney help regulate water balance.

D. Kidney help regulate water balance, Regulates levels of electrolytes such as sodium and potassium, Eliminates metabolic wastes

The Correct Answer is D.

Kidneys makes urine is incorrect. Kidneys do not make urine. They help regulate water balance, regulate levels of electrolytes such as sodium and potassium, and eliminate metabolic wastes. Urine is a byproduct of these functions.

As a person ages, kidney tissue and filtration capacity increase is incorrect. As a person ages, the kidneys and bladder change. This can affect functions such as bladder control and how well the kidneys filter blood. Kidney changes range from a decrease in kidney tissue to decreased filtration capacity.

Kidneys help regulate water balance is correct. Kidneys help regulate water balance, regulate levels of electrolytes such as sodium and potassium, and eliminate metabolic wastes. Urine is a byproduct of these functions.

Regulates levels of electrolytes such as sodium and potassium is correct. There must be a continual balance of water and salt in the blood. The urinary system, specifically the kidneys, help maintain this balance. It also balances levels of metabolites or electrolytes such as sodium, potassium, and calcium.

Eliminates metabolic wastes is correct. Urea, creatinine, uric acid, and ammonium are the primary types of nitrogenous wastes excreted from the body. The urinary system also detects and excretes excess water from the blood and out of the body.


Question 5:

Which of the following determines the strength of an acidic solution?

A. Litmus paper that turns red

B. Litmus paper that turns blue

C. Measured pH value equal to 7

D. Measured pH value less than 7

The Correct Answer is D.

Both litmus paper and a pH scale can be used to indicate whether a solution is acidic. However, a pH scale can also determine the strength of an acid.

Researchers can determine the strength of an acid or a base by measuring the pH of a solution. The pH value describes how acidic or basic a solution is. On pH scale, shown below, if the number is less than 7 the solution is acidic. A pH greater than 7 means the solution is basic. When the pH is exactly 7, the solution is neutral.


Question 6:

Which statement best represents Mendel’s experiments with garden peas?

A. As a result, Mendel developed several theories that have since been disproved.

B. Mendel realized he was on an incorrect track, which led him to other experimental media

C. As a result, Mendel developed foundational conclusions that are still valued and followed today.

D. Mendel collaborated with others interested in genetics to develop heredity guidelines we still use today

The Correct Answer is D.

Mendel developed theories of genetics that scientists around the world use today.

From experiments with garden peas, Mendel developed a simple set of rules that accurately predicted patterns of heredity. He discovered that plants either self-pollinate or cross-pollinate, when the pollen from one plant fertilizes the pistil of another plant. He also discovered that traits are either dominant or recessive. Dominant traits are expressed, and recessive traits are hidden.

Mendel’s Theory of Heredity

To explain his results, Mendel proposed a theory that has become the foundation of the science of genetics. The theory has five elements:

  • Parents do not transmit traits directly to their offspring. Rather, they pass on units of information called genes.
  • For each trait, an individual has two factors: one from each parent. If the two factors have the same information, the individual is homozygous for that trait. If the two factors are different, the individual is heterozygous for that trait. Each copy of a factor, or gene, is called an allele.
  • The alleles determine the physical appearance, or phenotype. The set of alleles an individual has is its genotype.
  • An individual receives one allele from each parent.
  • The presence of an allele does not guarantee that the trait will be expressed.

Question 7:

Which part of the digestive system comes before the stomach?

A. mouth

B. esophagus

C. ileum

D. colon

The Correct Answer is B.

Oral Cavity is the first part of the digestive system. It is bounded by the lips and cheeks and contains the teeth and tongue. Its primary function is to masticate, or chew, and moisten the food.

Pharynx, or throat, connects the mouth to the esophagus.

Esophagus is a muscular tube about 25 centimeters long. Food travels down it to the cardiac sphincter of the stomach.

Pyloric sphincter. The exit of the stomach.

Small intestine is about 6 meters long and consists of three parts: duodenum, jejunum, and ileum.

Large intestine, consists of the cecum, colon, rectum, and anal canal. The cecum is located where the small and large intestine meet. The primary function of the large intestine is to compress the waste and collect any excess water that can be recycled.

Colon is about 1.5 to 1.8 meters long and consists of four parts: the ascending, transverse, descending, and sigmoid colon.

 


Question 8:

In which state of matter do the particles of iron have the lowest amount of cohesion?

A. Solid iron particles have the lowest amount of cohesion

B. Liquid iron particles have the lowest amount of cohesion

C. Gaseous iron particles have the lowest amount of cohesion

D. The particles have the same amount of cohesion in all states of matter.

The Correct Answer is C.

The particles in a sample of gas are farther apart than in solids or liquids and therefore have the lowest amount of cohesion.

  • Cohesion is the tendency of particles of the same kind to stick to each other.
  • A solid has the lowest amount of energy because its particles are packed close together. Liquids have more energy than a solid, and gases have more energy than solids or liquids because the cohesive forces are very weak.

Question 9:

Why did it take many years for the cell theory to be developed?

A. Advancements in microscopy took place slowly.

B. Cells were difficult to isolate for experimental analysis

C. Researchers believed a cell formed from preexisting cells

D. Scientists already proved that cells were essential for life.

The Correct Answer is A.

Robert Hooke discovered the first cells in the mid-eighteenth century. The cell theory is a theory because it is supported by a significant number of experimental findings. The cell theory took many years to be developed because microscopes were not powerful enough to make such observations.

This theory, or in-depth explanation, about cells consists of three parts:

  • All living things are composed of one or more cells.
  • Cells are alive and represent the basic unit of life.
  • All cells are produced from pre-existing cells.

 


Question 10:

What structure plays a role in air conduction?

A. Alveolus

B. Capillary

C. Lung

D. Trachea

The Correct Answer is D.

The primary function of the respiratory system is to provide oxygen to and remove carbon dioxide from the body. In addition to gas exchange, the respiratory system enables a person to breathe. Breathing, or inhalation, is essential to life. It is the mechanism that provides oxygen to the body. Without oxygen, cells are unable to perform their functions necessary to keep the body alive. The primary muscle of inspiration is the diaphragm. Known as the chest cavity, this dome shaped structure flattens when it contracts. The rib cage moves outward, allowing outside air to be drawn into the lungs. During relaxation, the diaphragm returns to its dome shape and the rib cage moves back to its natural position. This causes the chest cavity to push air out of the lungs.

The respiratory system can be functionally divided into two parts:

  • Air-conducting portion: Air is delivered to the lungs. This region consists of the upper and lower respiratory tract—specifically, the larynx, trachea, bronchi, and bronchioles.
  • Gas exchange portion: Gas exchange takes place between the air and the blood. This portion includes the lungs, alveoli, and capillaries.